[PATCH v3 3/3] PCI: imx: clear vreg bypass when pcie vph voltage is 3v3
From: Richard Zhu <hongxing.zhu@nxp.com>
Date: 2021-03-25 08:59:32
Also in:
linux-pci, lkml
Subsystem:
pci driver for imx6, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Richard Zhu, Lucas Stach, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
Both 1.8v and 3.3v power supplies can be used by i.MX8MQ PCIe PHY. In default, the PCIE_VPH voltage is suggested to be 1.8v refer to data sheet. When PCIE_VPH is supplied by 3.3v in the HW schematic design, the VREG_BYPASS bits of GPR registers should be cleared from default value 1b'1 to 1b'0. Thus, the internal 3v3 to 1v8 translator would be turned on. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> --- drivers/pci/controller/dwc/pci-imx6.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 853ea8e82952..d9d534f0840f 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c@@ -37,6 +37,7 @@ #define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9) #define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10) #define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11) +#define IMX8MQ_GPR_PCIE_VREG_BYPASS BIT(12) #define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8) #define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000
@@ -80,6 +81,7 @@ struct imx6_pcie { u32 tx_swing_full; u32 tx_swing_low; struct regulator *vpcie; + struct regulator *vph; void __iomem *phy_base; /* power domain for pcie */
@@ -621,6 +623,17 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) imx6_pcie_grp_offset(imx6_pcie), IMX8MQ_GPR_PCIE_REF_USE_PAD, IMX8MQ_GPR_PCIE_REF_USE_PAD); + /* + * Regarding to the datasheet, the PCIE_VPH is suggested + * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the + * VREG_BYPASS should be cleared to zero. + */ + if (imx6_pcie->vph && + regulator_get_voltage(imx6_pcie->vph) > 3000000) + regmap_update_bits(imx6_pcie->iomuxc_gpr, + imx6_pcie_grp_offset(imx6_pcie), + IMX8MQ_GPR_PCIE_VREG_BYPASS, + 0); break; case IMX7D: regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
@@ -1130,6 +1143,13 @@ static int imx6_pcie_probe(struct platform_device *pdev) imx6_pcie->vpcie = NULL; } + imx6_pcie->vph = devm_regulator_get_optional(&pdev->dev, "vph"); + if (IS_ERR(imx6_pcie->vph)) { + if (PTR_ERR(imx6_pcie->vph) != -ENODEV) + return PTR_ERR(imx6_pcie->vph); + imx6_pcie->vph = NULL; + } + platform_set_drvdata(pdev, imx6_pcie); ret = imx6_pcie_attach_pd(dev);
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel