[PATCH v6 13/13] arm64: dts: imx8mq: Add node to G2 hardware
From: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Date: 2021-03-18 08:22:15
Also in:
linux-devicetree, linux-media, linux-rockchip, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Split VPU node in two: one for G1 and one for G2 since they are different hardware blocks. Add syscon for hardware control block. Remove reg-names property that is useless. Each VPU node only need one interrupt. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> --- version 5: - use syscon instead of VPU reset arch/arm64/boot/dts/freescale/imx8mq.dtsi | 43 ++++++++++++++++++----- 1 file changed, 34 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 17c449e12c2e..b537d153ebbd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi@@ -1329,15 +1329,16 @@ usb3_phy1: usb-phy@382f0040 { status = "disabled"; }; - vpu: video-codec@38300000 { + vpu_ctrl: syscon@38320000 { + compatible = "nxp,imx8mq-vpu-ctrl", "syscon"; + reg = <0x38320000 0x10000>; + }; + + vpu_g1: video-codec@38300000 { compatible = "nxp,imx8mq-vpu"; - reg = <0x38300000 0x10000>, - <0x38310000 0x10000>, - <0x38320000 0x10000>; - reg-names = "g1", "g2", "ctrl"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "g1", "g2"; + reg = <0x38300000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "g1"; clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, <&clk IMX8MQ_CLK_VPU_G2_ROOT>, <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
@@ -1350,9 +1351,33 @@ vpu: video-codec@38300000 { <&clk IMX8MQ_VPU_PLL_OUT>, <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_VPU_PLL>; - assigned-clock-rates = <600000000>, <600000000>, + assigned-clock-rates = <600000000>, <300000000>, + <800000000>, <0>; + power-domains = <&pgc_vpu>; + nxp,imx8mq-vpu-ctrl = <&vpu_ctrl>; + }; + + vpu_g2: video-codec@38310000 { + compatible = "nxp,imx8mq-vpu-g2"; + reg = <0x38310000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "g2"; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, + <&clk IMX8MQ_CLK_VPU_G2_ROOT>, + <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; + clock-names = "g1", "g2", "bus"; + assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>, + <&clk IMX8MQ_CLK_VPU_G2>, + <&clk IMX8MQ_CLK_VPU_BUS>, + <&clk IMX8MQ_VPU_PLL_BYPASS>; + assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>, + <&clk IMX8MQ_VPU_PLL_OUT>, + <&clk IMX8MQ_SYS1_PLL_800M>, + <&clk IMX8MQ_VPU_PLL>; + assigned-clock-rates = <600000000>, <300000000>, <800000000>, <0>; power-domains = <&pgc_vpu>; + nxp,imx8mq-vpu-ctrl = <&vpu_ctrl>; }; pcie0: pcie@33800000 {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel