[PATCH v9 13/13] arm64: dts: imx8mq: Add node to G2 hardware
From: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Date: 2021-04-07 07:36:57
Also in:
linux-devicetree, linux-media, linux-rockchip, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Split the VPU node in two: one for G1 and one for G2 since they are different hardware blocks. Add syscon for the hardware control block. Remove the reg-names property that is useless. Each VPU node only needs one interrupt. Change G2 assigned clock to match the specification. In both nodes all the clocks need to be assigned to make sure that the control block will be correctly clocked even if only one device node is enabled. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> --- version 9: - Corrections in commit message version 7: - use nxp,imx8m-vpu-ctrl as phandle syscon property name version 5: - use syscon instead of VPU reset arch/arm64/boot/dts/freescale/imx8mq.dtsi | 43 ++++++++++++++++++----- 1 file changed, 34 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 17c449e12c2e..65158414d255 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi@@ -1329,15 +1329,16 @@ usb3_phy1: usb-phy@382f0040 { status = "disabled"; }; - vpu: video-codec@38300000 { + vpu_ctrl: syscon@38320000 { + compatible = "nxp,imx8mq-vpu-ctrl", "syscon"; + reg = <0x38320000 0x10000>; + }; + + vpu_g1: video-codec@38300000 { compatible = "nxp,imx8mq-vpu"; - reg = <0x38300000 0x10000>, - <0x38310000 0x10000>, - <0x38320000 0x10000>; - reg-names = "g1", "g2", "ctrl"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "g1", "g2"; + reg = <0x38300000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "g1"; clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, <&clk IMX8MQ_CLK_VPU_G2_ROOT>, <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
@@ -1350,9 +1351,33 @@ vpu: video-codec@38300000 { <&clk IMX8MQ_VPU_PLL_OUT>, <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_VPU_PLL>; - assigned-clock-rates = <600000000>, <600000000>, + assigned-clock-rates = <600000000>, <300000000>, + <800000000>, <0>; + power-domains = <&pgc_vpu>; + nxp,imx8m-vpu-ctrl = <&vpu_ctrl>; + }; + + vpu_g2: video-codec@38310000 { + compatible = "nxp,imx8mq-vpu-g2"; + reg = <0x38310000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "g2"; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, + <&clk IMX8MQ_CLK_VPU_G2_ROOT>, + <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; + clock-names = "g1", "g2", "bus"; + assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>, + <&clk IMX8MQ_CLK_VPU_G2>, + <&clk IMX8MQ_CLK_VPU_BUS>, + <&clk IMX8MQ_VPU_PLL_BYPASS>; + assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>, + <&clk IMX8MQ_VPU_PLL_OUT>, + <&clk IMX8MQ_SYS1_PLL_800M>, + <&clk IMX8MQ_VPU_PLL>; + assigned-clock-rates = <600000000>, <300000000>, <800000000>, <0>; power-domains = <&pgc_vpu>; + nxp,imx8m-vpu-ctrl = <&vpu_ctrl>; }; pcie0: pcie@33800000 {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel