[PATCH v2 1/4] arm64: dts: ti: k3: squelch warning about lack of #interrupt-cells
From: Sekhar Nori <hidden>
Date: 2020-11-17 16:20:05
Also in:
linux-devicetree, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
There are couple of places where INTA interrupt controller lacks #interrupt-cells property. This leads to warnings of the type: arch/arm64/boot/dts/ti/k3-j721e-main.dtsi:147.51-156.5: Warning (interrupt_provider): /bus@100000/main-navss/interrupt-controller@33d00000: Missing #interrupt-cells in interrupt provider When building TI device-tree files with W=2 warning level. Fix these. Signed-off-by: Sekhar Nori <redacted> --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 1 + arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 1 + 2 files changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 3eeb6e9876db..aa8725db0187 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi@@ -473,6 +473,7 @@ interrupt-controller; interrupt-parent = <&intr_main_navss>; msi-controller; + #interrupt-cells = <0>; ti,sci = <&dmsc>; ti,sci-dev-id = <179>; ti,interrupt-ranges = <0 0 256>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index e2a96b2c423c..ffedd9531362 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi@@ -148,6 +148,7 @@ interrupt-controller; interrupt-parent = <&main_navss_intr>; msi-controller; + #interrupt-cells = <0>; ti,sci = <&dmsc>; ti,sci-dev-id = <209>; ti,interrupt-ranges = <0 0 256>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel