[PATCH v2 4/9] spi: spi-s3c64xx: Rename S3C64XX_SPI_SLAVE_* to S3C64XX_SPI_CS_*
From: Łukasz Stelmach <l.stelmach@samsung.com>
Date: 2020-08-21 17:30:24
Also in:
linux-samsung-soc, linux-spi, lkml
Subsystem:
arm/samsung s3c, s5p and exynos arm architectures, samsung spi drivers, spi subsystem, the rest · Maintainers:
Krzysztof Kozlowski, Andi Shyti, Mark Brown, Linus Torvalds
Rename S3C64XX_SPI_SLAVE_* to S3C64XX_SPI_CS_* to match documentation. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> --- drivers/spi/spi-s3c64xx.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 3364d362ed21..433b9d77b914 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c@@ -29,7 +29,7 @@ #define S3C64XX_SPI_CH_CFG 0x00 #define S3C64XX_SPI_CLK_CFG 0x04 #define S3C64XX_SPI_MODE_CFG 0x08 -#define S3C64XX_SPI_SLAVE_SEL 0x0C +#define S3C64XX_SPI_CS_REG 0x0C #define S3C64XX_SPI_INT_EN 0x10 #define S3C64XX_SPI_STATUS 0x14 #define S3C64XX_SPI_TX_DATA 0x18
@@ -64,9 +64,9 @@ #define S3C64XX_SPI_MODE_TXDMA_ON (1<<1) #define S3C64XX_SPI_MODE_4BURST (1<<0) -#define S3C64XX_SPI_SLAVE_AUTO (1<<1) -#define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0) -#define S3C64XX_SPI_SLAVE_NSC_CNT_2 (2<<4) +#define S3C64XX_SPI_CS_NSC_CNT_2 (2<<4) +#define S3C64XX_SPI_CS_AUTO (1<<1) +#define S3C64XX_SPI_CS_SIG_INACT (1<<0) #define S3C64XX_SPI_INT_TRAILING_EN (1<<6) #define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5)
@@ -319,18 +319,18 @@ static void s3c64xx_spi_set_cs(struct spi_device *spi, bool enable) if (enable) { if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) { - writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + writel(0, sdd->regs + S3C64XX_SPI_CS_REG); } else { - u32 ssel = readl(sdd->regs + S3C64XX_SPI_SLAVE_SEL); + u32 ssel = readl(sdd->regs + S3C64XX_SPI_CS_REG); - ssel |= (S3C64XX_SPI_SLAVE_AUTO | - S3C64XX_SPI_SLAVE_NSC_CNT_2); - writel(ssel, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + ssel |= (S3C64XX_SPI_CS_AUTO | + S3C64XX_SPI_CS_NSC_CNT_2); + writel(ssel, sdd->regs + S3C64XX_SPI_CS_REG); } } else { if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) - writel(S3C64XX_SPI_SLAVE_SIG_INACT, - sdd->regs + S3C64XX_SPI_SLAVE_SEL); + writel(S3C64XX_SPI_CS_SIG_INACT, + sdd->regs + S3C64XX_SPI_CS_REG); } }
@@ -951,9 +951,9 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd) sdd->cur_speed = 0; if (sci->no_cs) - writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + writel(0, sdd->regs + S3C64XX_SPI_CS_REG); else if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) - writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + writel(S3C64XX_SPI_CS_SIG_INACT, sdd->regs + S3C64XX_SPI_CS_REG); /* Disable Interrupts - we use Polling if not DMA mode */ writel(0, regs + S3C64XX_SPI_INT_EN);
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel