HI,

On Fri, Jul 24, 2020 at 12:54 AM Maxime Ripard [off-list ref] wrote:

Hi,

On Tue, Jul 14, 2020 at 03:20:29PM +0800, Frank Lee wrote:

quoted

From: Yangtao Li <redacted>

Allwinner A100 is a new SoC with Cortex-A53 cores, this commit adds
the basical DTSI file of it, including the clock, i2c, pins, sid, ths,
nmi, and UART support.

Signed-off-by: Yangtao Li <redacted>
---
 .../arm64/boot/dts/allwinner/sun50i-a100.dtsi | 364 ++++++++++++++++++
 1 file changed, 364 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
new file mode 100644
index 000000000000..3fb2443f2121
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi

@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-a100-ccu.h>
+#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
+
+/ {
+     interrupt-parent = <&gic>;
+     #address-cells = <2>;
+     #size-cells = <2>;
+
+     cpus {
+             #address-cells = <1>;
+             #size-cells = <0>;
+
+             cpu0: cpu@0 {
+                     compatible = "arm,armv8";

You should use the arm,cortex-a53 compatible here, arm,armv8 is for
software models.

quoted

+             sid@3006000 {

The node name is supposed to be the class of the device, and the DT spec
defines a list of them already. eeprom would be better suited here.

EFuse is more accurate?

Thx,
Yangtao

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel