[PATCH 35/73] arm64: tegra: Add missing #phy-cells property on Jetson TX2
STALE2288d
From: Thierry Reding <hidden>
Date: 2020-06-16 14:06:49
Also in:
linux-tegra
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Thierry Reding <redacted> PHYs need to have a #phy-cells property that defines how many cells are required in their specifier. The standard Ethernet PHY doesn't require a specifier, so set its #phy-cells to 0. Signed-off-by: Thierry Reding <redacted> --- arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 2fcaa2e64370..de049d8d458a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi@@ -50,6 +50,8 @@ phy: phy@0 { interrupt-parent = <&gpio>; interrupts = <TEGRA186_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>; + + #phy-cells = <0>; }; }; };
--
2.24.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel