[PATCH 5/6] arm64: dts: imx8mp-evk: enable usb1 as host mode
From: Li Jun <hidden>
Date: 2020-06-09 11:25:22
Also in:
linux-usb
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Enable usb host port with type-A connector on imx8mp-evk board. Signed-off-by: Li Jun <redacted> --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 32 ++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 3da1fff..fbe056c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts@@ -43,6 +43,19 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + reg_usb1_host_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_host_vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + }; &fec {
@@ -91,6 +104,19 @@ status = "okay"; }; +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + &usdhc2 { assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; assigned-clock-rates = <400000000>;
@@ -172,6 +198,12 @@ >; }; + pinctrl_usb1_vbus: usb1grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x19 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel