Re: [PATCH 0/3] PCI: brcmstb: Add Broadcom STB support
From: Jaedon Shin <hidden>
Date: 2020-02-13 05:15:19
Also in:
linux-gpio, linux-pci
From: Jaedon Shin <hidden>
Date: 2020-02-13 05:15:19
Also in:
linux-gpio, linux-pci
2020. 2. 13. 오후 12:54, Florian Fainelli [off-list ref] 작성: +Jim, On 2/12/2020 6:59 PM, Jaedon Shin wrote:quoted
This series enables the ARM based Broadcom STB SoCs and supports GPIO based regulators for its power supplies. and this has an improvement on devm_ APIS.Which ARM-based SoCs did you try this on? We still have an issue with the multiple dma-ranges that must be handled to support 7445 with memory in the extension regions as well as 7278 and 7216.
I'm using BCM72604 which has only one memc. and device is Qualcomm Atheros QCA6174 Wi-Fi module.
See comments in specific patches.quoted
Jaedon Shin (3): PCI: brcmstb: Enable ARCH_BRCMSTB PCI: brcmstb: Add regulator support PCI: brcmstb: Drop clk_put when probe fails and remove .../bindings/pci/brcm,stb-pcie.yaml | 8 +- drivers/gpio/gpio-brcmstb.c | 13 +++- drivers/pci/controller/Kconfig | 2 +- drivers/pci/controller/pcie-brcmstb.c | 78 ++++++++++++++++++- 4 files changed, 97 insertions(+), 4 deletions(-)-- Florian
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel