On 2020/1/9 17:13, Neil Armstrong wrote:

Hi,

On 09/01/2020 03:30, Hanjie Lin wrote:

quoted

Adds support for Amlogic A1 USB Control Glue HW.

The Amlogic A1 SoC Family embeds 1 USB Controllers:
- a DWC3 IP configured as Host for USB2 and USB3

A glue connects the controllers to the USB2 PHY of A1 SoC.

Signed-off-by: Hanjie Lin <redacted>
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 99 +++++++++++++++++++++++++++-----------
 1 file changed, 71 insertions(+), 28 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 8a3ec1a..957eda2 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c

@@ -96,6 +96,11 @@
 	#define USB_R5_ID_DIG_TH_MASK				GENMASK(15, 8)
 	#define USB_R5_ID_DIG_CNT_MASK				GENMASK(23, 16)
 
+enum meson_soc_id {
+	MESON_SOC_G12A = 0,
+	MESON_SOC_A1,
+};
+
 enum {
 	USB2_HOST_PHY = 0,
 	USB2_OTG_PHY,

@@ -107,10 +112,21 @@ static const char *phy_names[PHY_COUNT] = {
 	"usb2-phy0", "usb2-phy1", "usb3-phy0",
 };
 
+static const struct clk_bulk_data meson_g12a_clocks[] = {
+	{ .id = NULL },
+};
+
+static const struct clk_bulk_data meson_a1_clocks[] = {
+	{ .id = "usb_ctrl" },
+	{ .id = "usb_bus" },
+	{ .id = "xtal_usb_ctrl" },
+};
+
 struct dwc3_meson_g12a {
 	struct device		*dev;
 	struct regmap		*regmap;
-	struct clk		*clk;
+	struct clk_bulk_data    *clks;
+	int num_clks;
 	struct reset_control	*reset;
 	struct phy		*phys[PHY_COUNT];
 	enum usb_dr_mode	otg_mode;

@@ -120,6 +136,7 @@ struct dwc3_meson_g12a {
 	struct regulator	*vbus;
 	struct usb_role_switch_desc switch_desc;
 	struct usb_role_switch	*role_switch;
+	int                     soc_id;
 };
 
 static void dwc3_meson_g12a_usb2_set_mode(struct dwc3_meson_g12a *priv,

@@ -151,7 +168,7 @@ static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
 				   U2P_R0_POWER_ON_RESET,
 				   U2P_R0_POWER_ON_RESET);
 
-		if (i == USB2_OTG_PHY) {
+		if (priv->otg_mode == USB_DR_MODE_OTG && i == USB2_OTG_PHY) {

I as said on v2, this is wrong, we can/need/must allow switching even if the dr_mode is not USB_DR_MODE_OTG.

Please add a struct used in match data with a simple bool like "otg_switch_support" and use it here and below
instead of using USB_DR_MODE_OTG.

Hi neil, 

Right, I thought only otg dr_mode(from dts) can allow switching by mistake.

I will add a drvdata struct includes both otg_switch_supported and clock info for each SoC comaptible in next version.

Thanks,
Hanjie

quoted

 			regmap_update_bits(priv->regmap,
 				U2P_R0 + (U2P_REG_SIZE * i),
 				U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS,

@@ -295,7 +312,7 @@ static int dwc3_meson_g12a_otg_mode_set(struct dwc3_meson_g12a *priv,
 {
 	int ret;
 
-	if (!priv->phys[USB2_OTG_PHY])
+	if (priv->otg_mode != USB_DR_MODE_OTG || !priv->phys[USB2_OTG_PHY])

Ditto

quoted

 		return -EINVAL;
 
 	if (mode == PHY_MODE_USB_HOST)

@@ -409,17 +426,32 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 		priv->vbus = NULL;
 	}
 
-	priv->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(priv->clk))
-		return PTR_ERR(priv->clk);
+	priv->soc_id = (enum meson_soc_id)of_device_get_match_data(&pdev->dev);
+
+	if (priv->soc_id == MESON_SOC_G12A) {
+		priv->clks = devm_kmemdup(dev, meson_g12a_clocks,
+					  sizeof(meson_g12a_clocks),
+					  GFP_KERNEL);
+		priv->num_clks = ARRAY_SIZE(meson_g12a_clocks);
+	} else if (priv->soc_id == MESON_SOC_A1) {
+		priv->clks = devm_kmemdup(dev, meson_a1_clocks,
+					  sizeof(meson_a1_clocks),
+					  GFP_KERNEL);
+		priv->num_clks = ARRAY_SIZE(meson_a1_clocks);
+	} else {
+		return -EINVAL;
+	}
+
+	if (!priv->clks)
+		return -ENOMEM;
 
-	ret = clk_prepare_enable(priv->clk);
+	ret = devm_clk_bulk_get(dev, priv->num_clks, priv->clks);
 	if (ret)
 		return ret;
 
-	devm_add_action_or_reset(dev,
-				 (void(*)(void *))clk_disable_unprepare,
-				 priv->clk);
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+	if (ret)
+		return ret;
 
 	platform_set_drvdata(pdev, priv);
 	priv->dev = dev;

@@ -433,16 +465,16 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 
 	ret = reset_control_reset(priv->reset);
 	if (ret)
-		return ret;
+		goto err_disable_clks;
 
 	ret = dwc3_meson_g12a_get_phys(priv);
 	if (ret)
-		return ret;
+		goto err_disable_clks;
 
 	if (priv->vbus) {
 		ret = regulator_enable(priv->vbus);
 		if (ret)
-			return ret;
+			goto err_disable_clks;
 	}
 
 	/* Get dr_mode */

@@ -458,7 +490,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 						dwc3_meson_g12a_irq_thread,
 						IRQF_ONESHOT, pdev->name, priv);
 		if (ret)
-			return ret;
+			goto err_disable_clks;
 	}
 
 	dwc3_meson_g12a_usb_init(priv);

@@ -467,7 +499,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	for (i = 0 ; i < PHY_COUNT ; ++i) {
 		ret = phy_init(priv->phys[i]);
 		if (ret)
-			return ret;
+			goto err_disable_clks;
 	}
 
 	/* Set PHY Power */

@@ -478,18 +510,17 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	}
 
 	ret = of_platform_populate(np, NULL, NULL, dev);
-	if (ret) {
-		clk_disable_unprepare(priv->clk);
+	if (ret)
 		goto err_phys_power;
-	}
+
+	if (priv->otg_mode != USB_DR_MODE_OTG)
+		goto setup_pm_runtime;
 
 	/* Setup OTG mode corresponding to the ID pin */
-	if (priv->otg_mode == USB_DR_MODE_OTG) {
-		otg_id = dwc3_meson_g12a_get_id(priv);
-		if (otg_id != priv->otg_phy_mode) {
-			if (dwc3_meson_g12a_otg_mode_set(priv, otg_id))
-				dev_warn(dev, "Failed to switch OTG mode\n");
-		}
+	otg_id = dwc3_meson_g12a_get_id(priv);
+	if (otg_id != priv->otg_phy_mode) {
+		if (dwc3_meson_g12a_otg_mode_set(priv, otg_id))
+			dev_warn(dev, "Failed to switch OTG mode\n");
 	}
 
 	/* Setup role switcher */

@@ -504,6 +535,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->role_switch))
 		dev_warn(dev, "Unable to register Role Switch\n");
 
+setup_pm_runtime:

Ditto

quoted

 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);

@@ -518,6 +550,9 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	for (i = 0 ; i < PHY_COUNT ; ++i)
 		phy_exit(priv->phys[i]);
 
+err_disable_clks:
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+
 	return ret;
 }
 

@@ -527,7 +562,8 @@ static int dwc3_meson_g12a_remove(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	int i;
 
-	usb_role_switch_unregister(priv->role_switch);
+	if (priv->otg_mode == USB_DR_MODE_OTG)
+		usb_role_switch_unregister(priv->role_switch);
 
 	of_platform_depopulate(dev);
 

@@ -547,7 +583,7 @@ static int __maybe_unused dwc3_meson_g12a_runtime_suspend(struct device *dev)
 {
 	struct dwc3_meson_g12a	*priv = dev_get_drvdata(dev);
 
-	clk_disable(priv->clk);
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
 
 	return 0;
 }

@@ -556,7 +592,7 @@ static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev)
 {
 	struct dwc3_meson_g12a	*priv = dev_get_drvdata(dev);
 
-	return clk_enable(priv->clk);
+	return clk_bulk_prepare_enable(priv->num_clks, priv->clks);
 }
 
 static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev)

@@ -619,7 +655,14 @@ static const struct dev_pm_ops dwc3_meson_g12a_dev_pm_ops = {
 };
 
 static const struct of_device_id dwc3_meson_g12a_match[] = {
-	{ .compatible = "amlogic,meson-g12a-usb-ctrl" },
+	{
+		.compatible = "amlogic,meson-g12a-usb-ctrl",
+		.data = (void *)MESON_SOC_G12A,
+	},
+	{
+		.compatible = "amlogic,meson-a1-usb-ctrl",
+		.data = (void *)MESON_SOC_A1,
+	},
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, dwc3_meson_g12a_match);

Neil

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel