[PATCH v4 2/6] dt-bindings: usb: dwc3: Add the Amlogic A1 Family DWC3 Glue Bindings
From: Hanjie Lin <hidden>
Date: 2020-01-09 02:31:01
Also in:
linux-amlogic, linux-devicetree, linux-usb
Subsystem:
open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
The Amlogic A1 SoC Family embeds 1 USB Controllers: - a DWC3 IP configured as Host for USB2 and USB3 A glue connects the controllers to the USB2 PHY of A1 SoC. Signed-off-by: Hanjie Lin <redacted> Signed-off-by: Yue Wang <yue.wang@amlogic.com> --- .../devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
index 4efb77b..f4595a3 100644
--- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
+++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml@@ -9,6 +9,8 @@ title: Amlogic Meson G12A DWC3 USB SoC Controller Glue maintainers: - Neil Armstrong <narmstrong@baylibre.com> + - Hanjie Lin <hanjie.lin@amlogic.com> + - Yue Wang <yue.wang@amlogic.com> description: | The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3
@@ -22,10 +24,14 @@ description: | The DWC3 Glue controls the PHY routing and power, an interrupt line is connected to the Glue to serve as OTG ID change detection. + The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in + host-only mode. + properties: compatible: enum: - amlogic,meson-g12a-usb-ctrl + - amlogic,meson-a1-usb-ctrl ranges: true
@@ -37,6 +43,11 @@ properties: clocks: minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 resets: minItems: 1
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel