Thread (36 messages) 36 messages, 6 authors, 2020-01-23

Re: [PATCH 3/7] clk: zynqmp: Warn user if clock user are more than allowed

From: Michael Tretter <m.tretter@pengutronix.de>
Date: 2019-11-21 14:31:48
Also in: linux-clk, linux-devicetree, lkml

On Tue, 12 Nov 2019 05:16:16 -0800, Rajan Vaja wrote:
quoted hunk ↗ jump to hunk
Warn user if clock is used by more than allowed devices.
This check is done by firmware and returns respective
error code. Upon receiving error code for excessive user,
warn user for the same.

This change is done to restrict VPLL use count. It is
assumed that VPLL is used by one user only.

Signed-off-by: Michal Simek <redacted>
Signed-off-by: Rajan Vaja <redacted>
---
 drivers/clk/zynqmp/pll.c             | 9 ++++++---
 drivers/firmware/xilinx/zynqmp.c     | 2 ++
 include/linux/firmware/xlnx-zynqmp.h | 1 +
 3 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
index a541397..2f4ccaa 100644
--- a/drivers/clk/zynqmp/pll.c
+++ b/drivers/clk/zynqmp/pll.c
@@ -188,9 +188,12 @@ static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 		frac = (parent_rate * f) / FRAC_DIV;
 
 		ret = eemi_ops->clock_setdivider(clk_id, m);
-		if (ret)
-			pr_warn_once("%s() set divider failed for %s, ret = %d\n",
-				     __func__, clk_name, ret);
+		if (ret) {
+			if (ret == -EUSERS)
+				WARN(1, "More than allowed devices are using the %s, which is forbidden\n", clk_name);
+			pr_err("%s() set divider failed for %s, ret = %d\n",
+			       __func__, clk_name, ret);
+		}
In case of -EUSERS this prints the warning and the error. This seems a
bit excessive to me. Isn't it enough to leave the existing
pr_warn_once() for the new error code? If not, then add a new warning
for the -EUSERS error, but leave the existing warning as it is.

Michael
quoted hunk ↗ jump to hunk
 
 		eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_DATA, clk_id, f, NULL);
 
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 0137bf3..ecc339d 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -53,6 +53,8 @@ static int zynqmp_pm_ret_code(u32 ret_status)
 		return -EACCES;
 	case XST_PM_ABORT_SUSPEND:
 		return -ECANCELED;
+	case XST_PM_MULT_USER:
+		return -EUSERS;
 	case XST_PM_INTERNAL:
 	case XST_PM_CONFLICT:
 	case XST_PM_INVALID_NODE:
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 25bedd2..f019d1c 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -96,6 +96,7 @@ enum pm_ret_status {
 	XST_PM_INVALID_NODE,
 	XST_PM_DOUBLE_REQ,
 	XST_PM_ABORT_SUSPEND,
+	XST_PM_MULT_USER = 2008,
 };
 
 enum pm_ioctl_id {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help