[Patch v3 06/10] arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
From: Benoit Parrot <hidden>
Date: 2019-11-12 14:25:32
Also in:
linux-clk, linux-devicetree, linux-omap, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add device nodes for CSI2 camera board OV5640. Add the CAL port nodes with the necessary linkage to the ov5640 nodes. Signed-off-by: Benoit Parrot <redacted> --- arch/arm/boot/dts/dra72-evm-common.dtsi | 35 +++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 8641a3d7d8ad..608c7676c293 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi@@ -187,6 +187,12 @@ gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + clk_ov5640_fixed: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; }; &dra7_pmx_core {
@@ -269,6 +275,23 @@ line-name = "vin6_sel_s0"; }; }; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2_phy0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; &uart1 {
@@ -580,3 +603,15 @@ &pcie1_rc { status = "okay"; }; + +&cal { + status = "okay"; +}; + +&csi2_0 { + csi2_phy0: endpoint@0 { + remote-endpoint = <&csi2_cam0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; +};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel