[Patch v3 10/10] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera
From: Benoit Parrot <hidden>
Date: 2019-11-12 14:25:16
Also in:
linux-clk, linux-devicetree, linux-omap, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
Add support for the OV5640 CSI camera: - add the OV5640 nodes - add the CAL node linkage - enable CAL node Signed-off-by: Benoit Parrot <redacted> --- .../arm64/boot/dts/ti/k3-am654-base-board.dts | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 1102b84f853d..73290c646334 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts@@ -53,6 +53,12 @@ gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; }; }; + + clk_ov5640_fixed: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; }; &wkup_pmx0 {
@@ -184,6 +190,23 @@ pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2_phy0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; &main_i2c2 {
@@ -280,3 +303,16 @@ &pcie1_ep { status = "disabled"; }; + +&cal { + status = "okay"; +}; + +&csi2_0 { + csi2_phy0: endpoint@0 { + remote-endpoint = <&csi2_cam0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; +}; +
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel