[Patch v3 09/10] arm64: dts: k3-am65-main Add CAL node
From: Benoit Parrot <hidden>
Date: 2019-11-12 14:25:23
Also in:
linux-clk, linux-devicetree, linux-omap, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
Add CAL dtsi node for AM654 device. Including proper power-domains and clock properties. Signed-off-by: Benoit Parrot <redacted> --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 799c75fa7981..4c65ed445e8b 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi@@ -516,4 +516,27 @@ dma-coherent; interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; }; + + cal: cal@6f03000 { + compatible = "ti,am654-cal"; + reg = <0x0 0x06f03000 0x0 0x400>, + <0x0 0x06f03800 0x0 0x40>; + reg-names = "cal_top", + "cal_rx_core0"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + ti,camerrx-control = <&scm_conf 0x40c0>; + clock-names = "fck"; + clocks = <&k3_clks 2 0>; + power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + }; + }; + }; };
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel