Re: [PATCH v2 10/14] arm64: dts: qcom: qcs404: Add OPP table
From: Vinod Koul <vkoul@kernel.org>
Date: 2019-01-30 04:42:45
Also in:
linux-arm-msm, linux-clk, linux-devicetree, lkml
From: Vinod Koul <vkoul@kernel.org>
Date: 2019-01-30 04:42:45
Also in:
linux-arm-msm, linux-clk, linux-devicetree, lkml
On 28-01-19, 19:32, Jorge Ramirez-Ortiz wrote:
Add a CPU OPP table to qcs404 Co-developed-by: Niklas Cassel <redacted> Signed-off-by: Niklas Cassel <redacted> Signed-off-by: Jorge Ramirez-Ortiz <redacted> --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 9b5c165..4594fea7 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi@@ -62,6 +62,21 @@ }; }; + cpu_opp_table: cpu_opp_table {
This should be:
cpu_opp_table: cpu-opp-table
IIRC node names are not supposed to have _ and tags not supposed to have
-, please compile with W=12 to trigger these warnings :)
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1094400000 {
+ opp-hz = /bits/ 64 <1094400000>;
+ };
+ opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ };
+ };
+
firmware {
scm: scm {
compatible = "qcom,scm-qcs404", "qcom,scm";
--
2.7.4-- ~Vinod _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel