[PATCH v2 11/14] arm64: dts: qcom: qcs404: Add HFPLL node
From: Jorge Ramirez-Ortiz <hidden>
Date: 2019-01-28 18:33:53
Also in:
linux-arm-msm, linux-clk, linux-devicetree, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
The high frequency pll functionality is required to enable CPU frequency scaling operation. Co-developed-by: Niklas Cassel <redacted> Signed-off-by: Niklas Cassel <redacted> Signed-off-by: Jorge Ramirez-Ortiz <redacted> --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 4594fea7..6a4f8a2 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi@@ -62,7 +62,7 @@ }; }; - cpu_opp_table: cpu_opp_table { + cpu_opp_table: cpu-opp-table { compatible = "operating-points-v2"; opp-shared;
@@ -375,6 +375,15 @@ #mbox-cells = <1>; }; + apcs_hfpll: clock-controller@b016000 { + compatible = "qcom,hfpll"; + reg = <0x0b016000 0x30>; + #clock-cells = <0>; + clock-output-names = "apcs_hfpll"; + clocks = <&xo_board>; + clock-names = "xo"; + }; + timer@b120000 { #address-cells = <1>; #size-cells = <1>;
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel