[PATCH v3 3/6] media: sun6i: Set 300MHz mod clock for A64
From: Jagan Teki <jagan@amarulasolutions.com>
Date: 2018-12-10 11:53:50
Also in:
linux-devicetree, linux-media, lkml
Subsystem:
allwinner a31 csi driver, media input infrastructure (v4l/dvb), the rest · Maintainers:
Yong Deng, Paul Kocialkowski, Mauro Carvalho Chehab, Linus Torvalds
The default CSI_SCLK seems unable to drive the sensor to capture the image, so update it to working clock rate 300MHz for A64. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
index bbe45e893722..4b872800b244 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c@@ -822,6 +822,11 @@ static int sun6i_csi_resource_request(struct sun6i_csi_dev *sdev, return PTR_ERR(sdev->clk_mod); } + /* A64 need 300MHz mod clock to operate properly */ + if (of_device_is_compatible(pdev->dev.of_node, + "allwinner,sun50i-a64-csi")) + clk_set_rate_exclusive(sdev->clk_mod, 300000000); + sdev->clk_ram = devm_clk_get(&pdev->dev, "ram"); if (IS_ERR(sdev->clk_ram)) { dev_err(&pdev->dev, "Unable to acquire dram-csi clock\n");
--
2.18.0.321.gffc6fa0e3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel