This series support CSI on Allwinner A64.

Allwinner A64 CSI has single channel time-multiplexed BT.656
CMOS sensor interface like H3 but work by lowering clock than
default mod clock.

Changes for v3:
- update dt-bindings for A64
- set mod clock via csi driver
- remove assign clocks from dtsi
- remove i2c-gpio opendrian
- fix avdd and dovdd supplies
- remove vcc-csi pin group supply

Note: This series created on top of H3 changes [1]

[1] https://patchwork.kernel.org/cover/10705905/

Any inputs,
Jagan. 

Jagan Teki (6):
  dt-bindings: media: sun6i: Add A64 CSI compatible
  media: sun6i: Add A64 compatible support
  media: sun6i: Set 300MHz mod clock for A64
  arm64: dts: allwinner: a64: Add A64 CSI controller
  arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1
  arm64: dts: allwinner: a64-amarula-relic: Add OV5640 camera node

 .../devicetree/bindings/media/sun6i-csi.txt   |  1 +
 .../allwinner/sun50i-a64-amarula-relic.dts    | 53 +++++++++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 25 +++++++++
 .../platform/sunxi/sun6i-csi/sun6i_csi.c      |  6 +++
 4 files changed, 85 insertions(+)

-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel