[PATCH 1/3] dt-bindings: gpio: add sama5d2 PIOBU support
From: Andrei.Stefanescu at microchip.com <hidden>
Date: 2018-11-07 15:12:36
Also in:
linux-devicetree, linux-gpio, lkml
Subsystem:
gpio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Linus Walleij, Bartosz Golaszewski, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This patch describes the compatible and the device tree bindings necessary for the sama5d2 PIOBU GPIO controller driver. Signed-off-by: Andrei Stefanescu <redacted> --- .../bindings/gpio/gpio-sama5d2-piobu.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-sama5d2-piobu.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-sama5d2-piobu.txt b/Documentation/devicetree/bindings/gpio/gpio-sama5d2-piobu.txt
new file mode 100644
index 0000000..791ac51
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-sama5d2-piobu.txt@@ -0,0 +1,23 @@ +GPIO controller for SAMA5D2 PIOBU pins. + +This pins have the property of not losing their voltage +during Backup/Self-refresh mode. + +These bindings should be set to a node in the dtsi file. + +Required properties: +- compatible: "syscon", "microchip,sama5d2-piobu" +- #gpio-cells: There are 2. The pin number is the + first, the second represents additional + parameters such as GPIO_ACTIVE_HIGH/LOW. +- gpio-controller: Marks the port as GPIO controller. + +Example: + + secumod at fc040000 { + compatible = "syscon", "microchip,sama5d2-piobu"; + reg = <0xfc040000 0x100>; + + gpio-controller; + #gpio-cells = <2>; + };
--
2.7.4