[PATCH v2 1/2] dt-bindings: gpio: add SAMA5D2 PIOBU support
From: Andrei.Stefanescu at microchip.com <hidden>
Date: 2018-11-20 08:08:43
Also in:
linux-devicetree, linux-gpio, lkml
Subsystem:
gpio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Linus Walleij, Bartosz Golaszewski, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This patch describes the compatible and the device tree bindings necessary for the SAMA5D2 PIOBU GPIO. Signed-off-by: Andrei Stefanescu <redacted> --- .../bindings/gpio/gpio-sama5d2-piobu.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-sama5d2-piobu.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-sama5d2-piobu.txt b/Documentation/devicetree/bindings/gpio/gpio-sama5d2-piobu.txt
new file mode 100644
index 0000000..2e260e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-sama5d2-piobu.txt@@ -0,0 +1,31 @@ +GPIO controller for SAMA5D2 PIOBU pins. + +These pins have the property of not losing their voltage +during Backup/Self-refresh mode. + +These bindings should be set to a node in the dtsi file. + +Required properties: +- compatible: "syscon", "microchip,sama5d2-piobu" +- #gpio-cells: There are 2. The pin number is the + first, the second represents additional + parameters such as GPIO_ACTIVE_HIGH/LOW. +- gpio-controller: Marks the port as GPIO controller. + +Note that the driver uses syscon and should be the child of +the syscon node. + +Example: + + secumod at fc040000 { + compatible = "atmel,sama5d2-secumod", "syscon", "simple-mfd"; + status = "okay"; + reg = <0xfc040000 0x100>; + + pioBU: piobu { + status = "okay"; + compatible = "microchip,sama5d2-piobu"; + gpio-controller; + #gpio-cells = <2>; + }; + };
--
2.7.4