[PATCH 1/3] dt-bindings: gpio: add sama5d2 PIOBU support
From: robh@kernel.org (Rob Herring)
Date: 2018-11-12 18:57:33
Also in:
linux-devicetree, linux-gpio
On Wed, Nov 07, 2018 at 03:12:32PM +0000, Andrei.Stefanescu at microchip.com wrote:
This patch describes the compatible and the device tree bindings necessary for the sama5d2 PIOBU GPIO controller driver.
Bindings describe the h/w, not drivers.
quoted hunk ↗ jump to hunk
Signed-off-by: Andrei Stefanescu <redacted> --- .../bindings/gpio/gpio-sama5d2-piobu.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-sama5d2-piobu.txtdiff --git a/Documentation/devicetree/bindings/gpio/gpio-sama5d2-piobu.txt b/Documentation/devicetree/bindings/gpio/gpio-sama5d2-piobu.txt new file mode 100644 index 0000000..791ac51 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-sama5d2-piobu.txt@@ -0,0 +1,23 @@ +GPIO controller for SAMA5D2 PIOBU pins. + +This pins have the property of not losing their voltage +during Backup/Self-refresh mode. + +These bindings should be set to a node in the dtsi file. + +Required properties: +- compatible: "syscon", "microchip,sama5d2-piobu"
Why the syscon? syscon should be last if it remains.
+- #gpio-cells: There are 2. The pin number is the + first, the second represents additional + parameters such as GPIO_ACTIVE_HIGH/LOW. +- gpio-controller: Marks the port as GPIO controller.
No interrupt capability?
+
+Example:
+
+ secumod at fc040000 {gpio at ...
+ compatible = "syscon", "microchip,sama5d2-piobu"; + reg = <0xfc040000 0x100>; + + gpio-controller; + #gpio-cells = <2>; + }; -- 2.7.4