[PATCH v2 7/7] arm64: dts: qcom: apq8016-sbc: Standardize LED labels
From: Amit Kucheria <hidden>
Date: 2018-10-29 09:17:27
Also in:
linux-arm-msm, linux-devicetree, linux-leds, linux-rockchip, lkml
On Mon, Oct 29, 2018 at 2:31 PM Manivannan Sadhasivam [off-list ref] wrote:
For all 96Boards, the following standard is used for onboard LEDs. green:user1 default-trigger: heartbeat green:user2 default-trigger: mmc0/disk-activity(onboard-storage) green:user3 default-trigger: mmc1 (SD-card) green:user4 default-trigger: none, panic-indicator yellow:wlan default-trigger: phy0tx blue:bt default-trigger: hci0-power So lets adopt the same for APQ8016 SBC (Dragonboard410c), which is one of the 96Boards CE platform.
You are missing a signed-off here :-) Acked-by: Amit Kucheria <redacted>
quoted hunk ↗ jump to hunk
--- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 46feedf7c989..35f95154316b 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi@@ -300,28 +300,28 @@ compatible = "gpio-leds"; led at 1 { - label = "apq8016-sbc:green:user1"; + label = "green:user1"; gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led at 2 { - label = "apq8016-sbc:green:user2"; + label = "green:user2"; gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; led at 3 { - label = "apq8016-sbc:green:user3"; + label = "green:user3"; gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc1"; default-state = "off"; }; led at 4 { - label = "apq8016-sbc:green:user4"; + label = "green:user4"; gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; panic-indicator;@@ -329,14 +329,14 @@ }; led at 5 { - label = "apq8016-sbc:yellow:wlan"; + label = "yellow:wlan"; gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; default-state = "off"; }; led at 6 { - label = "apq8016-sbc:blue:bt"; + label = "blue:bt"; gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "bluetooth-power"; default-state = "off"; --2.17.1