[PATCH v2 4/7] arm64: dts: hisilicon: hikey960: Standardize LED labels and triggers
From: Manivannan Sadhasivam <hidden>
Date: 2018-10-29 09:01:19
Also in:
linux-arm-msm, linux-devicetree, linux-leds, linux-rockchip, lkml
Subsystem:
arm/hisilicon soc support, the rest · Maintainers:
Wei Xu, Linus Torvalds
For all 96Boards, the following standard is used for onboard LEDs. green:user1 default-trigger: heartbeat green:user2 default-trigger: mmc0/disk-activity(onboard-storage) green:user3 default-trigger: mmc1 (SD-card) green:user4 default-trigger: none, panic-indicator yellow:wlan default-trigger: phy0tx blue:bt default-trigger: hci0-power So lets adopt the same for HiKey960 which is one of the 96Boards CE platform. Since there is no trigger available for onboard-storage UFS now, user2 trigger is set to none. Signed-off-by: Manivannan Sadhasivam <redacted> --- .../boot/dts/hisilicon/hi3660-hikey960.dts | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index c98bcbc8dfba..46435466f1ab 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts@@ -85,36 +85,36 @@ compatible = "gpio-leds"; user_led1 { - label = "user_led1"; + label = "green:user1"; /* gpio_150_user_led1 */ gpios = <&gpio18 6 0>; linux,default-trigger = "heartbeat"; }; user_led2 { - label = "user_led2"; + label = "green:user2"; /* gpio_151_user_led2 */ gpios = <&gpio18 7 0>; - linux,default-trigger = "mmc0"; + linux,default-trigger = "none"; }; user_led3 { - label = "user_led3"; + label = "green:user3"; /* gpio_189_user_led3 */ gpios = <&gpio23 5 0>; - default-state = "off"; + linux,default-trigger = "mmc0"; }; user_led4 { - label = "user_led4"; + label = "green:user4"; /* gpio_190_user_led4 */ gpios = <&gpio23 6 0>; panic-indicator; - linux,default-trigger = "cpu0"; + linux,default-trigger = "none"; }; wlan_active_led { - label = "wifi_active"; + label = "yellow:wlan"; /* gpio_205_wifi_active */ gpios = <&gpio25 5 0>; linux,default-trigger = "phy0tx";
@@ -122,7 +122,7 @@ }; bt_active_led { - label = "bt_active"; + label = "blue:bt"; gpios = <&gpio25 7 0>; /* gpio_207_user_led1 */ linux,default-trigger = "hci0-power";
--
2.17.1