[PATCH v2 5/7] arm64: dts: hisilicon: poplar: Standardize LED labels and triggers
From: Manivannan Sadhasivam <hidden>
Date: 2018-10-29 09:01:28
Also in:
linux-arm-msm, linux-devicetree, linux-leds, linux-rockchip, lkml
Subsystem:
arm/hisilicon soc support, the rest · Maintainers:
Wei Xu, Linus Torvalds
For all 96Boards, the following standard is used for onboard LEDs. green:user1 default-trigger: heartbeat green:user2 default-trigger: mmc0/disk-activity(onboard-storage) green:user3 default-trigger: mmc1 (SD-card) green:user4 default-trigger: none, panic-indicator yellow:wlan default-trigger: phy0tx blue:bt default-trigger: hci0-power So lets adopt the same for Poplar, which is one of the 96Boards Enterprise edition platform. Due to absence of WLAN and BT support, corresponding LED nodes are not considered. Signed-off-by: Manivannan Sadhasivam <redacted> --- .../arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
index d30f6eb8a5ee..32716c96b457 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts@@ -35,30 +35,31 @@ compatible = "gpio-leds"; user-led0 { - label = "USER-LED0"; + label = "green:user1"; gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; default-state = "off"; }; user-led1 { - label = "USER-LED1"; + label = "green:user2"; gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; default-state = "off"; }; user-led2 { - label = "USER-LED2"; + label = "green:user3"; gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; + linux,default-trigger = "mmc1"; default-state = "off"; }; user-led3 { - label = "USER-LED3"; + label = "green:user4"; gpios = <&gpio10 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "cpu0"; + linux,default-trigger = "none"; + panic-indicator; default-state = "off"; }; };
--
2.17.1