[PATCH 1/6] dt-bindings: ap806: add the cluster clock node in the syscon file
From: gregory.clement@bootlin.com (Gregory CLEMENT)
Date: 2018-09-22 18:17:32
Also in:
linux-clk, lkml
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Document the device tree binding for the cluster clock controllers found in the Armada 7K/8K SoCs. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> --- .../arm/marvell/ap806-system-controller.txt | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
index 3fd21bb7cb37..8f281816a6b8 100644
--- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt@@ -136,3 +136,25 @@ ap_syscon1: system-controller at 6f8000 { #thermal-sensor-cells = <1>; }; }; + +Cluster clocks: +--------------- + +Device Tree Clock bindings for cluster clock of AP806 Marvell. Each +cluster contain up to 2 CPUs running at the same frequency. + +Required properties: +- compatible: must be "marvell,ap806-cpu-clock"; +- #clock-cells : should be set to 1. +- clocks : shall be the input parents clock phandle for the clock. + +ap_syscon1: system-controller at 6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + + cpu_clk: clock-cpu { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + }; +};
--
2.19.0