[PATCH v3 20/23] arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon
From: miquel.raynal@bootlin.com (Miquel Raynal)
Date: 2018-07-16 14:42:03
Also in:
linux-devicetree, linux-pm
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
New bindings impose to declare the thermal IP from within a new syscon. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 14 ++++++++++---- arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 18 ++++++++++++------ 2 files changed, 22 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 4f2a704615b0..45662fc09d18 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi@@ -258,10 +258,16 @@ }; }; - ap_thermal: thermal at 6f808c { - compatible = "marvell,armada-ap806-thermal"; - reg = <0x6f808c 0x4>, - <0x6f8084 0x8>; + ap_syscon1: system-controller at 6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ap_thermal: thermal-sensor at 80 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x80 0x10>; + }; }; }; };
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index ab31ba20aa2a..1b813a95149c 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi@@ -177,12 +177,6 @@ interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; }; - CP110_LABEL(thermal): thermal at 400078 { - compatible = "marvell,armada-cp110-thermal"; - reg = <0x400078 0x4>, - <0x400070 0x8>; - }; - CP110_LABEL(syscon0): system-controller at 440000 { compatible = "syscon", "simple-mfd"; reg = <0x440000 0x2000>;
@@ -223,6 +217,18 @@ }; }; + CP110_LABEL(syscon1): system-controller at 400000 { + compatible = "syscon", "simple-mfd"; + reg = <0x400000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + CP110_LABEL(thermal): thermal-sensor at 70 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x70 0x10>; + }; + }; + CP110_LABEL(usb3_0): usb3 at 500000 { compatible = "marvell,armada-8k-xhci", "generic-xhci";
--
2.14.1