[PATCH 00/12] Marvell NAND controller rework with ->exec_op()

Hi Robert,

On Sun, 07 Jan 2018 21:55:33 +0100
Robert Jarzmik [off-list ref] wrote:

Boris Brezillon [off-list ref] writes:

quoted

On Wed, 3 Jan 2018 21:10:28 +0100
Boris Brezillon [off-list ref] wrote:  

quoted

Hm, that's weird. Can you try with the old driver (pxa3xx)?  

Ah you're right, my NAND was damaged ...

quoted

Alternatively, you can type 'nand bad' from uboot to check if it
detects the same bad blocks.  

Mmmh no, the SPL is barebox in my case. Do you have a command in
linux or barebox to do the same thing ?

Not sure, but nand -i should do the trick.
https://www.barebox.org/doc/latest/commands/hwmanip/nand.html

But I am not sure this is still relevant now we know the NAND was
damaged by the previous experiments (sorry about that). Can you put the
NAND in a clean state and report us if it is still failing?

Thanks for your help,
Miqu?l