(off-list ancestor, not in this archive)
[PATCH 00/12] Marvell NAND controller rework with ->exec_op() · robert.jarzmik@free.fr (Robert Jarzmik) · 2018-01-07
[PATCH 00/12] Marvell NAND controller rework with ->exec_op() · Miquel RAYNAL <hidden> · 2018-01-07
[PATCH 00/12] Marvell NAND controller rework with ->exec_op() · Boris Brezillon <hidden> · 2018-01-07
[PATCH 00/12] Marvell NAND controller rework with ->exec_op() · Boris Brezillon <hidden> · 2018-01-07

STALE3140d

Revision v1 of 5 in this series.

Revisions (5)

2017-12-23 v1 [diff vs current]
2017-12-23 v1 [diff vs current]
2018-01-03 v1 [diff vs current]
2018-01-07 v1 current
2018-01-09 v1 [diff vs current]

[PATCH 00/12] Marvell NAND controller rework with ->exec_op()

From: robert.jarzmik@free.fr (Robert Jarzmik)
Date: 2018-01-07 20:55:33

Boris Brezillon [off-list ref] writes:

On Wed, 3 Jan 2018 21:10:28 +0100
Boris Brezillon [off-list ref] wrote:

quoted

Hm, that's weird. Can you try with the old driver (pxa3xx)?

Ah you're right, my NAND was damaged ...

Alternatively, you can type 'nand bad' from uboot to check if it
detects the same bad blocks.

Mmmh no, the SPL is barebox in my case. Do you have a command in linux or
barebox to do the same thing ?

Cheers.

-- 
Robert