[PATCH v4 2/2] arm: dts: Add Mediatek MT2701 i2c device node
From: Jun Gao <hidden>
Date: 2017-06-14 01:12:03
Also in:
linux-devicetree, linux-i2c, linux-mediatek, lkml
On Tue, 2017-06-13 at 15:45 +0200, Matthias Brugger wrote:
On 13/06/17 15:23, Jun Gao wrote:quoted
On Tue, 2017-06-13 at 14:52 +0200, Matthias Brugger wrote:quoted
On 13/06/17 12:24, Jun Gao wrote:quoted
On Tue, 2017-06-13 at 11:36 +0200, Matthias Brugger wrote:quoted
On 12/06/17 13:54, Jun Gao wrote:quoted
On Fri, 2017-05-26 at 15:35 +0800, Jun Gao wrote:quoted
From: Jun Gao <redacted> Add MT2701 i2c device node. Signed-off-by: Jun Gao <redacted> --- arch/arm/boot/dts/mt2701-evb.dts | 42 ++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/mt2701.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+)[...]quoted
Dear Matthias, Could you take this patch together with [PATCH v4 1/2]dt-bindings: i2c: Add Mediatek MT2701 i2c binding ? Thanks!They are both included in the pull request I send [1] [2], or do I miss something? Regards, Matthias [1] https://github.com/mbgg/linux-mediatek/commit/729b7f8dbdaff270c53052897ea06486221a49a2 [2] https://github.com/mbgg/linux-mediatek/commit/c6c301d3ff7531894257acc4f4a73928a109bda1Dear Matthias, Would you mind to use the same style as follows in i2c-mtk.txt of [2]? "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for Mediatek MT2701 "mediatek,mt6577-i2c": for Mediatek MT6577 "mediatek,mt6589-i2c": for Mediatek MT6589 "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for Mediatek MT7623 "mediatek,mt8173-i2c": for Mediatek MT8173 Thanks!You mean I should fix-up the patch to fit to the new binding description? Or do you mean it should be MTxxxx instead of mtxxxx? Regards, MatthiasDear Matthias, I mean fix-up the patch to fit to the new binding description. Is it OK?Then I can't see the difference between what you are asking for and what is already pushed to the repository. Please send a patch, that will make things clearer. Regards, Matthias
Dear Matthias,
like this:
diff:
Required properties:
- compatible: value should be either of the following.
- (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
- (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
- (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
- (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
- (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
+ "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for Mediatek
MT2701
+ "mediatek,mt6577-i2c": for Mediatek MT6577
+ "mediatek,mt6589-i2c": for Mediatek MT6589
+ "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for Mediatek
MT7623
+ "mediatek,mt8173-i2c": for Mediatek MT8173
- reg: physical base address of the controller and dma base, length
of memory
mapped region.
- interrupts: interrupt number to the cpu.
Thanks!