Thread (16 messages) 16 messages, 3 authors, 2017-06-14
STALE3302d
Revisions (3)
  1. v3 [diff vs current]
  2. v3 [diff vs current]
  3. v4 current

[PATCH v4 1/2] dt-bindings: i2c: Add Mediatek MT2701 i2c binding

From: Jun Gao <hidden>
Date: 2017-05-26 07:35:49
Also in: linux-devicetree, linux-i2c, linux-mediatek, lkml
Subsystem: i2c subsystem host drivers, open firmware and flattened device tree bindings, the rest · Maintainers: Andi Shyti, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

From: Jun Gao <redacted>

Add MT2701 i2c binding to i2c-mt6577.txt and there is no need to
modify i2c driver.

Signed-off-by: Jun Gao <redacted>
---
 Documentation/devicetree/bindings/i2c/i2c-mt6577.txt | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
index 0ce6fa3..52f2023 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
@@ -4,11 +4,12 @@ The Mediatek's I2C controller is used to interface with I2C devices.
 
 Required properties:
   - compatible: value should be either of the following.
-      (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
-      (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
-      (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
-      (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
-      (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
+	"mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for Mediatek MT2701
+	"mediatek,mt6577-i2c": for Mediatek MT6577
+	"mediatek,mt6589-i2c": for Mediatek MT6589
+	"mediatek,mt8127-i2c": for Mediatek MT8127
+	"mediatek,mt8135-i2c": for Mediatek MT8135
+	"mediatek,mt8173-i2c": for Mediatek MT8173
   - reg: physical base address of the controller and dma base, length of memory
     mapped region.
   - interrupts: interrupt number to the cpu.
-- 
1.8.1.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help