On Sun, Jun 11, 2017 at 02:58:47PM +0800, icenowy at aosc.io wrote:

? 2017-06-07 17:42?Maxime Ripard ???

quoted

On Mon, Jun 05, 2017 at 12:01:48AM +0800, Icenowy Zheng wrote:

quoted

+	soc {
+		display_clocks: clock at 1000000 {
+			compatible = "allwinner,sun8i-a83t-de2-clk";
+			reg = <0x01000000 0x100000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			assigned-clocks = <&ccu CLK_DE>;
+			assigned-clock-parents = <&ccu CLK_PLL_DE>;
+			assigned-clock-rates = <432000000>;
+		};

We discussed that already a few times, but there's no reason to do
so. If you need a downstream clock at a particular rate, call
clk_set_rate on it, period.

Whether its parent will be coming from PLL_DE or some other more
appriopriate clock is not relevant and doesn't make any difference.

The clock framework is not so smart to deal with these infomations:
- CLK_PLL_PERIPH should always be 600MHz
- CLK_TVE should always be 216MHz
- CLK_DE (in fact CLK_MIXER{0,1}) should be larger than 300MHz (for 4K)

None of what you're doing guarantees what you state above, so I'm not
really sure what your point is.

So we have to specify CLK_DE to be 432MHz, and then it will set
CLK_PLL_DE to this value, then the CLK_TVE can be set to 216MHz with
divider 2.

Yes, but it works by accident. Any clock change somewhere in the same
clock-tree might break whatever you have set in the DT.

Hence why you want to do it within the clock framework and your
driver, not here.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170613/095e1b7d/attachment.sig>