[PATCH v4 5/7] ARM: dts: meson6: switch to new bindings for UART nodes
From: jbrunet@baylibre.com (Jerome Brunet)
Date: 2017-06-12 09:43:02
Also in:
linux-amlogic, linux-devicetree, linux-serial, lkml
On Fri, 2017-06-09 at 11:49 +0200, Neil Armstrong wrote:
Switch to the stable UART bindings by adding a XTAL node and using the proper compatible strings. Signed-off-by: Neil Armstrong <redacted>
Shouldn't this patch be squashed with patch 4 ?
quoted hunk ↗ jump to hunk
--- ?arch/arm/boot/dts/meson6.dtsi | 28 ++++++++++++++++++++++++++++ ?1 file changed, 28 insertions(+)diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index b0fc91f..a334fbe 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi@@ -70,9 +70,37 @@? }; ? }; ? + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + ? clk81: clk at 0 { ? #clock-cells = <0>; ? compatible = "fixed-clock"; ? clock-frequency = <200000000>; ? }; ?}; /* end of / */ + + +&uart_AO { + clocks = <&xtal>, <&clk81>, <&clk81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_A { + clocks = <&xtal>, <&clk81>, <&clk81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_B { + clocks = <&xtal>, <&clk81>, <&clk81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_C { + clocks = <&xtal>, <&clk81>, <&clk81>; + clock-names = "xtal", "pclk", "baud"; +};