[PATCH] arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 node
From: Ran Wang <hidden>
Date: 2017-06-02 02:46:02
Also in:
linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Add "dis_rxdet_inp3_quirk" boolean property to USB3 node. This property is used to disable rx detection in P3 PHY mode. Signed-off-by: Ran Wang <redacted> --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index f4b8b7e..9137280 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi@@ -567,6 +567,7 @@ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; }; usb1: usb at 3000000 {
@@ -575,6 +576,7 @@ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; }; usb2: usb at 3100000 {
@@ -583,6 +585,7 @@ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; }; sata: sata at 3200000 {
--
2.1.0.27.g96db324