[PATCH] arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 node

Add "dis_rxdet_inp3_quirk" boolean property to USB3 node. This property
is used to disable rx detection in P3 PHY mode.

Signed-off-by: Ran Wang <redacted>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index f4b8b7e..9137280 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi

@@ -567,6 +567,7 @@
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		usb1: usb at 3000000 {

@@ -575,6 +576,7 @@
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		usb2: usb at 3100000 {

@@ -583,6 +585,7 @@
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		sata: sata at 3200000 {

-- 
2.1.0.27.g96db324

Hello Sir,
    How is the review result of this patch. I am waiting for it be merged, thanks.

BR
Ran

-----Original Message-----
From: Ran Wang [mailto:ran.wang_1 at nxp.com] 
Sent: Friday, June 02, 2017 10:30 AM
To: Rob Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Catalin Marinas <catalin.marinas@arm.com>; Will Deacon <redacted>
Cc: Shawn Guo <shawnguo@kernel.org>; Andy Tang <redacted>; Horia Geant? <horia.geanta@nxp.com>; Marc Zyngier <redacted>; Mihai Emilian Bantea <redacted>; Jia Hongtao <redacted>; Scott Wood <oss@buserror.net>; Gang Liu <redacted>; york sun <redacted>; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS <redacted>; moderated list:ARM64 PORT (AARCH64 ARCHITECTURE) <redacted>; open list <redacted>; Ran Wang <redacted>
Subject: [PATCH] arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 node

Add "dis_rxdet_inp3_quirk" boolean property to USB3 node. This property is used to disable rx detection in P3 PHY mode.

Signed-off-by: Ran Wang <redacted>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index f4b8b7e..9137280 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi

@@ -567,6 +567,7 @@
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		usb1: usb at 3000000 {

@@ -575,6 +576,7 @@
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		usb2: usb at 3100000 {

@@ -583,6 +585,7 @@
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		sata: sata at 3200000 {
--

2.1.0.27.g96db324

On Wed, Jul 05, 2017 at 03:15:19AM +0000, Ran Wang wrote:

Hello Sir,
    How is the review result of this patch. I am waiting for it be merged, thanks.

The patch has been merged into Linus' tree.  Sorry for that I forgot to
reply telling the patch was applied.

Shawn