Thread (42 messages) 42 messages, 6 authors, 2017-07-18

[linux-sunxi] [PATCH v6 8/9] arm64: allwinner: a64: enable AXP803 regulators for Pine64

From: icenowy@aosc.io (Icenowy Zheng)
Date: 2017-05-19 03:00:36
Also in: linux-devicetree, lkml 


? 2017?5?19? GMT+08:00 ??10:54:21, Chen-Yu Tsai [off-list ref] ??:
Hi,

On Thu, May 18, 2017 at 3:16 PM, Icenowy Zheng [off-list ref] wrote:
quoted
Add support of AXP803 regulators in the Pine64 device tree, in order
to
quoted
enable many future functionalities, e.g. Wi-Fi.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v6:
- Rebased on next-20170517.

 .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 109
+++++++++++++++++++++
quoted
 1 file changed, 109 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
quoted
index 36001884ed33..40921bacb39c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -118,6 +118,115 @@
        };
 };

+#include "axp803.dtsi"
+
+&reg_aldo1 {
+       regulator-min-microvolt = <2800000>;
+       regulator-max-microvolt = <2800000>;
+       regulator-name = "vcc-csi";
"csi-afvdd-dovdd"

This regulator provides power for the camera module's Auto Focus, if
available,
and Digital i/O parts of the sensor module. Hence the names of the
rails.
quoted
+};
+
+&reg_aldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <2700000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+       regulator-name = "vcc-phy";
+};
+
+&reg_dcdc1 {
+       regulator-always-on;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+       regulator-always-on;
+       regulator-min-microvolt = <1000000>;
+       regulator-max-microvolt = <1300000>;
+       regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+       regulator-always-on;
+       regulator-min-microvolt = <1500000>;
+       regulator-max-microvolt = <1500000>;
+       regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+       regulator-always-on;
+       regulator-min-microvolt = <1100000>;
+       regulator-max-microvolt = <1100000>;
+       regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-hdmi";
+};
This should probably be "vcc-hdmi-dsi".
oh yes...

quoted
+
+&reg_dldo2 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-mipi";
+};
On the MIPI-LCD page of the schematics, it says this is connected to
VDD18, so it should be 1.8V.
Rename it to "vcc-dsi-1v8"?

quoted
+
+&reg_dldo3 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "avdd-csi";
+};
2.8V for this one.
Thanks!

ChenYu

quoted
+
+&reg_dldo4 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-wifi";
+};
+
+&reg_eldo1 {
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-name = "cpvdd";
+};
+
+&reg_eldo3 {
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-name = "vdd-1v8-csi";
+};
+
+&reg_fldo1 {
+       regulator-min-microvolt = <1200000>;
+       regulator-max-microvolt = <1200000>;
+       regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <1100000>;
+       regulator-max-microvolt = <1100000>;
+       regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+       regulator-name = "vcc-rtc";
+};
+
 /* On Exp and Euler connectors */
 &uart0 {
        pinctrl-names = "default";
--
2.12.2

--
You received this message because you are subscribed to the Google
Groups "linux-sunxi" group.
quoted
To unsubscribe from this group and stop receiving emails from it,
send an email to linux-sunxi+unsubscribe at googlegroups.com.
quoted
For more options, visit https://groups.google.com/d/optout.
On Thu, May 18, 2017 at 3:16 PM, Icenowy Zheng [off-list ref] wrote:
quoted
Add support of AXP803 regulators in the Pine64 device tree, in order
to
quoted
enable many future functionalities, e.g. Wi-Fi.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v6:
- Rebased on next-20170517.

 .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 109
+++++++++++++++++++++
quoted
 1 file changed, 109 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
quoted
index 36001884ed33..40921bacb39c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -118,6 +118,115 @@
        };
 };

+#include "axp803.dtsi"
+
+&reg_aldo1 {
+       regulator-min-microvolt = <2800000>;
+       regulator-max-microvolt = <2800000>;
+       regulator-name = "vcc-csi";
+};
+
+&reg_aldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <2700000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+       regulator-name = "vcc-phy";
+};
+
+&reg_dcdc1 {
+       regulator-always-on;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+       regulator-always-on;
+       regulator-min-microvolt = <1000000>;
+       regulator-max-microvolt = <1300000>;
+       regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+       regulator-always-on;
+       regulator-min-microvolt = <1500000>;
+       regulator-max-microvolt = <1500000>;
+       regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+       regulator-always-on;
+       regulator-min-microvolt = <1100000>;
+       regulator-max-microvolt = <1100000>;
+       regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-wifi";
+};
+
+&reg_eldo1 {
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-name = "cpvdd";
+};
+
+&reg_eldo3 {
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-name = "vdd-1v8-csi";
+};
+
+&reg_fldo1 {
+       regulator-min-microvolt = <1200000>;
+       regulator-max-microvolt = <1200000>;
+       regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <1100000>;
+       regulator-max-microvolt = <1100000>;
+       regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+       regulator-name = "vcc-rtc";
+};
+
 /* On Exp and Euler connectors */
 &uart0 {
        pinctrl-names = "default";
--
2.12.2

--
You received this message because you are subscribed to the Google
Groups "linux-sunxi" group.
quoted
To unsubscribe from this group and stop receiving emails from it,
send an email to linux-sunxi+unsubscribe at googlegroups.com.
quoted
For more options, visit https://groups.google.com/d/optout.
  



    
  

  
    

      

        Keyboard shortcuts
      

      

        
          
hback out one level

          
jnext message in thread

          
kprevious message in thread

          
ldrill in

          
Escclose help / fold thread tree

          
?toggle this help