[PATCH v6 1/9] irqchip/sunxi-nmi: add A64 R_INTC to the binding doc
From: icenowy@aosc.io (Icenowy Zheng)
Date: 2017-05-18 07:17:36
Also in:
linux-devicetree, lkml
Subsystem:
irqchip drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Thomas Gleixner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The A31 NMI driver seems to be using wrong base address. As we're going to convert to use a correct NMI base address (and correctly name it to R_INTC as the datasheet suggests), add a new compatible string for the "correct" R_INTC, which we will use for A64 SoC. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Rob Herring <robh@kernel.org> --- Changes in v6: - Added Rob's ACK. .../bindings/interrupt-controller/allwinner,sunxi-nmi.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
index 81cd3692405e..fea0c6a6211f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt@@ -3,8 +3,11 @@ Allwinner Sunxi NMI Controller Required properties: -- compatible : should be "allwinner,sun7i-a20-sc-nmi" or - "allwinner,sun6i-a31-sc-nmi" or "allwinner,sun9i-a80-nmi" +- compatible : should be one of: + "allwinner,sun6i-a31-sc-nmi" + "allwinner,sun7i-a20-sc-nmi" + "allwinner,sun9i-a80-nmi" + "allwinner,sun50i-a64-r-intc" - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an
--
2.12.2