[PATCH 1/5] clk: sunxi-ng: mp: Adjust parent rate for pre-dividers
From: Chen-Yu Tsai <hidden>
Date: 2017-02-14 03:35:38
Also in:
linux-clk, lkml
Subsystem:
arm/allwinner sunxi soc support, common clk framework, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Michael Turquette, Stephen Boyd, Linus Torvalds
The MP style clocks support an mux with pre-dividers. While the driver
correctly accounted for them in the .determine_rate callback, it did
not in the .recalc_rate and .set_rate callbacks.
This means when calculating the factors in the .set_rate callback, they
would be off by a factor of the active pre-divider. Same goes for
reading back the clock rate after it is set.
Fixes: 2ab836db5097 ("clk: sunxi-ng: Add M-P factor clock support")
Signed-off-by: Chen-Yu Tsai <redacted>
---
Maybe we want to Cc stable for this one?
drivers/clk/sunxi-ng/ccu_mp.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/clk/sunxi-ng/ccu_mp.c b/drivers/clk/sunxi-ng/ccu_mp.c
index 22c2ca7a2a22..b583f186a804 100644
--- a/drivers/clk/sunxi-ng/ccu_mp.c
+++ b/drivers/clk/sunxi-ng/ccu_mp.c@@ -85,6 +85,10 @@ static unsigned long ccu_mp_recalc_rate(struct clk_hw *hw, unsigned int m, p; u32 reg; + /* Adjust parent_rate according to pre-dividers */ + ccu_mux_helper_adjust_parent_for_prediv(&cmp->common, &cmp->mux, + -1, &parent_rate); + reg = readl(cmp->common.base + cmp->common.reg); m = reg >> cmp->m.shift;
@@ -117,6 +121,10 @@ static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate, unsigned int m, p; u32 reg; + /* Adjust parent_rate according to pre-dividers */ + ccu_mux_helper_adjust_parent_for_prediv(&cmp->common, &cmp->mux, + -1, &parent_rate); + max_m = cmp->m.max ?: 1 << cmp->m.width; max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
--
2.11.0