On Fri, 2016-11-18 at 18:45 +0000, Lee Jones wrote:

[Sending Arnd this time!]

quoted

Arnd,

Do you have a preference?

quoted

The Aspeed LPC Host Controller is presented as a syscon device to
arbitrate access by LPC and pinmux drivers. LPC pinmux configuration on
fifth generation SoCs depends on bits in both the System Control Unit
and the LPC Host Controller.

quoted

quoted

quoted

Signed-off-by: Andrew Jeffery <redacted>

---
?Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt | 17 +++++++++++++++++

Create a new directory in bindings/mfd called 'syscon'.

Or perhaps 'bindings/syscon'.

Sounds good to me. I'll wait for Arnd's feedback.

Note that this patch conflicts with some of the ideas I outlined in

https://www.spinics.net/lists/arm-kernel/msg543233.html

I sent it hoping to get some feedback on the approach to take for these
LPC-related bits. Did you have any suggestions? The problems with
hardware complexity are amplified by the fact that the datasheet is
only available under NDA, but I will do what I can to clarify.

quoted

quoted

?1 file changed, 17 insertions(+)
?create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt

diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
new file mode 100644
index 000000000000..792651488c3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt

@@ -0,0 +1,17 @@
+* Device tree bindings for the Aspeed LPC Host Controller (LPCHC)
+
+The LPCHC registers configure LPC behaviour between the BMC and the host
+system. The LPCHC also participates in pinmux requests on g5 SoCs and is
+therefore considered a syscon device.
+
+Required properties:

quoted

quoted

quoted

+- compatible:		"aspeed,ast2500-lpchc", "syscon"
+- reg:			contains offset/length value of the LPCHC memory

+			region.

Why not just use a single tab, then you don't have to linewrap?

I'll clean that up.

Cheers,

Andrew

quoted

quoted

+Example:
+

quoted

quoted

quoted

+lpchc: lpchc at 1e7890a0 {
+	compatible = "aspeed,ast2500-lpchc", "syscon";
+	reg = <0x1e7890a0 0xc4>;

+};

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161122/b6462917/attachment.sig>