Thread (9 messages) flat view 9 messages, 2 authors, 2016-09-12
STALE3623d

Revision v4 of 12 in this series.

Revisions (12)
  1. v2 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v3 [diff vs current]
  5. v4 [diff vs current]
  6. v4 [diff vs current]
  7. v4 current
  8. v4 [diff vs current]
  9. v4 [diff vs current]
  10. v4 [diff vs current]
  11. v5 [diff vs current]
  12. v5 [diff vs current]

[PATCH v4 2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile

From: shawnguo@kernel.org (Shawn Guo)
Date: 2016-09-09 11:53:36

A bit more comments as below ...

On Tue, Sep 06, 2016 at 02:04:20PM +0800, Jun Nie wrote:
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
Affinity bits are missing for PPI interrupt.  You can use a bit help
from defines in include/dt-bindings/interrupt-controller/arm-gic.h.
+		};
+
+		pmu {
+			compatible = "arm,cortex-a53-pmu";
+			interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		};
There are no unit-address for timer and pmu, so we should probably move
them out of soc simple-bus and put them directly under root.
+
+		aon_sysctrl: aon-sysctrl at 116000 {
+			compatible = "zte,zx296718-aon-sysctrl", "syscon";
+			reg = <0x116000 0x1000>;
+		};
+
+		uart0: uart at 11f000 {
+			compatible = "arm,pl011", "arm,primecell";
+			arm,primecell-periphid = <0x001feffe>;
+			reg = <0x11f000 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24m>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dma: dma-controller at 1460000 {
+			compatible = "zte,zx296702-dma";
+			reg = <0x01460000 0x1000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24m>;
+			clock-names = "dmaclk";
+			#dma-cells = <1>;
+			dma-channels = <32>;
+			dma-requests = <32>;
+		};
+
+		sysctrl: sysctrl at 1463000 {
+			compatible = "zte,zx296718-sysctrl", "syscon";
+			reg = <0x1463000 0x1000>;
+		};
+
+		gic: interrupt-controller at 2a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			#redistributor-regions = <6>;
+			redistributor-stride = <0x0 0x40000>;
+			interrupt-controller;
+			reg = <0x02a00000 0x10000>,
+			      <0x02b00000 0x20000>,
+			      <0x02b20000 0x20000>,
+			      <0x02b40000 0x20000>,
+			      <0x02b60000 0x20000>,
+			      <0x02b80000 0x20000>,
+			      <0x02ba0000 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
Affinity bits are missing.

Shawn
+		};
+	};
+};
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help