[PATCH v2 05/14] dt-bindings: document SY8106A regulator driver
From: megous at megous.com <hidden>
Date: 2016-06-25 03:45:27
Also in:
linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, voltage and current regulator framework · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Liam Girdwood, Mark Brown
From: Ondrej Jirman <redacted> This patch adds the binding documentation for the sy8106a regulator driver. Signed-off-by: Ondrej Jirman <redacted> --- .../bindings/regulator/sy8106a-regulator.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt b/Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt
new file mode 100644
index 0000000..1e623a34
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt@@ -0,0 +1,21 @@ +SY8106A Voltage regulator + +Required properties: +- compatible: Must be "silergy,sy8106a" +- reg: I2C slave address - must be <0x65> + +Any property defined as part of the core regulator binding, defined in +regulator.txt, can also be used. + +Example: + + sy8106a { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "sy8106a-vdd"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <200>; + regulator-boot-on; + regulator-always-on; + };
--
2.9.0