[PATCH v2 03/14] dt-bindings: document sun8i_ths - H3 thermal sensor driver
From: megous at megous.com <hidden>
Date: 2016-06-25 03:45:29
Also in:
linux-devicetree, linux-pm, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, thermal · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano
From: Ondrej Jirman <redacted> This patch adds the binding documentation for the sun8i_ths driver. This is a driver for thermal sensor found in Allwinner H3 SoC. Signed-off-by: Ond?ej Jirman <redacted> --- .../devicetree/bindings/thermal/sun8i-ths.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-ths.txt
diff --git a/Documentation/devicetree/bindings/thermal/sun8i-ths.txt b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt
new file mode 100644
index 0000000..76859d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt@@ -0,0 +1,26 @@ +* Thermal sensor driver for Allwinner H3 SoC + +Required properties: +- compatible : "allwinner,sun8i-h3-ths" +- reg : Address range of the thermal sensor registers and of the calibration + data +- resets : Must contain phandles to reset controls matching the entries + of the names +- reset-names : Must include the name "ahb" +- clocks : Must contain phandles to clock controls matching the entries + of the names +- clock-names : Must contain "ahb" for the bus gate and "ths" for the THS + clock + +Example: +ths: ths at 01c25000 { + #thermal-sensor-cells = <0>; + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x400>, + <0x01c14234 0x4>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + resets = <&bus_rst 136>; + reset-names = "ahb"; + clocks = <&bus_gates 72>, <&ths_clk>; + clock-names = "ahb", "ths"; +};
--
2.9.0