[PATCH 5/7] mtd: nand: Add Hynix H27UBG8T2BTR-BC to nand_ids table
From: Boris Brezillon <hidden>
Date: 2016-06-06 18:55:54
Also in:
linux-devicetree, lkml
On Mon, 6 Jun 2016 13:24:22 +0300 Aleksei Mamlin [off-list ref] wrote:
Add the full description of the Hynix H27UBG8T2BTR-BC NAND chip in the nand_ids table so that we can later use the NAND ECC infos and ONFI timings mode in controller drivers.
Still hoping to get this series [1] merged in 4.8, but if that's not the case, I'll apply your patch. BTW, that would be great if you could test it on your platforms. Regards, Boris [1]https://lkml.org/lkml/2016/5/27/264
quoted hunk ↗ jump to hunk
Signed-off-by: Aleksei Mamlin <redacted> --- drivers/mtd/nand/nand_ids.c | 4 ++++ 1 file changed, 4 insertions(+)diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index ccc05f5..ccdc773 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c@@ -52,6 +52,10 @@ struct nand_flash_dev nand_flash_ids[] = { { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, NAND_ECC_INFO(40, SZ_1K), 4 }, + {"H27UBG8T2BTR-BC 32G 3.3V 8-bit", + { .id = {0xad, 0xd7, 0x94, 0xda, 0x74, 0xc3} }, + SZ_8K, SZ_4K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, + NAND_ECC_INFO(40, SZ_1K), 0 }, LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
-- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com