[PATCH 5/7] mtd: nand: Add Hynix H27UBG8T2BTR-BC to nand_ids table
From: Aleksei Mamlin <hidden>
Date: 2016-06-06 10:25:08
Also in:
linux-devicetree, lkml
Subsystem:
memory technology devices (mtd), nand flash subsystem, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Linus Torvalds
Add the full description of the Hynix H27UBG8T2BTR-BC NAND chip in the nand_ids table so that we can later use the NAND ECC infos and ONFI timings mode in controller drivers. Signed-off-by: Aleksei Mamlin <redacted> --- drivers/mtd/nand/nand_ids.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index ccc05f5..ccdc773 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c@@ -52,6 +52,10 @@ struct nand_flash_dev nand_flash_ids[] = { { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, NAND_ECC_INFO(40, SZ_1K), 4 }, + {"H27UBG8T2BTR-BC 32G 3.3V 8-bit", + { .id = {0xad, 0xd7, 0x94, 0xda, 0x74, 0xc3} }, + SZ_8K, SZ_4K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, + NAND_ECC_INFO(40, SZ_1K), 0 }, LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
--
2.7.3