[PATCH 13/14] regulator: pwm: Support extra continuous mode cases

On Fri, 3 Jun 2016 14:03:08 -0700
Brian Norris [off-list ref] wrote:

Hi Boris,

On Fri, Jun 03, 2016 at 10:23:11AM +0200, Boris Brezillon wrote:

quoted

The continuous mode allows one to declare a PWM regulator without having
to declare the voltage <-> dutycycle association table. It works fine as
long as your voltage(dutycycle) function is linear, but also has the
following constraints:

- dutycycle for min_uV = 0%
- dutycycle for max_uV = 100%
- dutycycle for min_uV < dutycycle for max_uV

While the linearity constraint is acceptable for now, we sometimes need to
restrict of the PWM range (to limit the maximum/minimum voltage for
example) or have a min_uV_dutycycle > max_uV_dutycycle (this could be
tweaked with PWM polarity, but not all PWMs support inverted polarity).

Add the pwm-dutycycle-range and pwm-dutycycle-unit DT properties to define
such constraints. If those properties are not defined, the PWM regulator
use the default pwm-dutycycle-range = <0 100> and
pwm-dutycycle-unit = <100> values (existing behavior).

Signed-off-by: Boris Brezillon <redacted>
---
 drivers/regulator/pwm-regulator.c | 80 ++++++++++++++++++++++++++++++++++-----
 1 file changed, 71 insertions(+), 9 deletions(-)

diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index c39ecd1..2e70eb1 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c  

...

quoted

@@ -132,31 +141,67 @@ static int pwm_regulator_is_enabled(struct regulator_dev *dev)
 static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
+	unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
+	unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
+	unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
 	int min_uV = rdev->constraints->min_uV;
-	int diff = rdev->constraints->max_uV - min_uV;
+	int max_uV = rdev->constraints->max_uV;
+	int diff_uV = max_uV - min_uV;
 	struct pwm_state pstate;
+	unsigned int diff_duty;
+	unsigned int voltage;
 
 	pwm_get_state(drvdata->pwm, &pstate);
 
-	return min_uV + pwm_get_relative_duty_cycle(&pstate, diff);
+	voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit);
+
+	if (max_uV_duty < min_uV_duty) {  

I still might have appreciated a comment above this line (and similar
in set_voltage()) to help explain why max can be less than min -- you
have it in the commit message, but nowhere in the code. Not a big deal,
and the code looks otherwise good:

Sure, I'll add more comments in the next version.

Thanks,

Boris

Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>

quoted

+		voltage = min_uV_duty - voltage;
+		diff_duty = min_uV_duty - max_uV_duty;
+	} else {
+		voltage = voltage - min_uV_duty;
+		diff_duty = max_uV_duty - min_uV_duty;
+	}
+
+	voltage = DIV_ROUND_CLOSEST_ULL((u64)voltage * diff_uV, diff_duty);
+
+	return voltage + min_uV;
 }
 
 static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
-					int min_uV, int max_uV,
-					unsigned *selector)
+				     int req_min_uV, int req_max_uV,
+				     unsigned int *selector)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
+	unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
+	unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
+	unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
 	unsigned int ramp_delay = rdev->constraints->ramp_delay;
-	unsigned int req_diff = min_uV - rdev->constraints->min_uV;
+	int min_uV = rdev->constraints->min_uV;
+	int max_uV = rdev->constraints->max_uV;
+	int diff_uV = max_uV - min_uV;
 	struct pwm_state pstate;
-	unsigned int diff;
+	unsigned int diff_duty;
+	unsigned int dutycycle;
 	int ret;
 
 	pwm_prepare_new_state(drvdata->pwm, &pstate);
-	diff = rdev->constraints->max_uV - rdev->constraints->min_uV;
 
-	/* We pass diff as the scale to get a uV precision. */
-	pwm_set_relative_duty_cycle(&pstate, req_diff, diff);
+	if (max_uV_duty < min_uV_duty)
+		diff_duty = min_uV_duty - max_uV_duty;
+	else
+		diff_duty = max_uV_duty - min_uV_duty;
+
+	dutycycle = DIV_ROUND_CLOSEST_ULL((u64)(req_min_uV - min_uV) *
+					  diff_duty,
+					  diff_uV);
+
+	if (max_uV_duty < min_uV_duty)
+		dutycycle = min_uV_duty - dutycycle;
+	else
+		dutycycle = min_uV_duty + dutycycle;
+
+	pwm_set_relative_duty_cycle(&pstate, dutycycle, duty_unit);
 
 	ret = pwm_apply_state(drvdata->pwm, &pstate);
 	if (ret) {  

[...]

Brian

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com