hello Arnd, peter,

On 04/26/2016 01:44 PM, Arnd Bergmann wrote:

On Tuesday 26 April 2016 12:15:32 Peter Griffin wrote:

quoted

quoted

quoted

If not what would you recommend instead? 

It's still not clear to me what that bit in the syscfg register
is for. Given the error message about "sti-audio-clk-glue",
I suspect that this is actually a clock controller and that
it should be using the clock binding with a separate driver
instead of manipulating the regmap directly from the audio driver.

Luckily I do have the datasheet for the audio-glue sysconf register.

It says: -

[11:8] PCM_CLK_SEL: Selects the frequency synthesizer clock or the external
PCM clock for each channel.

The driver only ever sets this to 1 which selects the frequency synthesizer
clock. So the bitfield of the register which the driver is using (PCM_CLK_SEL)
is a clock mux.

Ok, that sounds like it could be either a really simple clock driver
with just a few lines, or integrated into an existing clock driver
if you already have one for this syscon node.

	Arnd

FYI, Name of this glue is related to the register name. But it does not
concern only clock...
 This glue register is used to :
- select clock source ( clock framework or external clock from GPIO)
=> one bit field per IP instance (player->clk_sel)
- select uniperiph player IP instance for PCM out.
(http://www.spinics.net/lists/alsa-devel/msg49034.html)

Regards
Arnaud