[PATCH v3 4/7] ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl
flat view
STALE3927d
REVIEWED: 1 (1M)
From: Roger Shimizu <hidden>
Date: 2016-01-21 14:38:47
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v3 of 2 in this series; 1 review trailer.
Revisions (2)
- v2 [diff vs current]
- v3 current
The GPIOs controlling the LEDs, listed below, are active high, not low:
- gpio-leds: "lswvl:red:alarm" pin
- gpio-leds: "lswvl:red:func" pin
- gpio-leds: "lswvl:amber:info" pin
- gpio-leds: "lswvl:blue:func" pin
- gpio-leds: "lswvl:red:hdderr{0,1}" pin
Fixes: c43379e150aa ("ARM: dts: add buffalo linkstation ls-wvl/vl")
Signed-off-by: Roger Shimizu <redacted>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/boot/dts/kirkwood-lswvl.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts
index 28fd9abd7a57..36eec7392ab4 100644
--- a/arch/arm/boot/dts/kirkwood-lswvl.dts
+++ b/arch/arm/boot/dts/kirkwood-lswvl.dts@@ -186,22 +186,22 @@ led at 1 { label = "lswvl:red:alarm"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; led at 2 { label = "lswvl:red:func"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; led at 3 { label = "lswvl:amber:info"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; led at 4 { label = "lswvl:blue:func"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; led at 5 {
@@ -212,12 +212,12 @@ led at 6 { label = "lswvl:red:hdderr0"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led at 7 { label = "lswvl:red:hdderr1"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; }; };
--
2.1.4