[PATCH v2 3/7] ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl
flat view
STALE3924d
SUPERSEDED
From: Roger Shimizu <hidden>
Date: 2016-01-20 15:33:54
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v2 of 5 in this series.
Revisions (5)
- v2 current
- v2
- v2
- v2
- v3 [diff vs current]
Make all leds initially to "off" state except power indicator, so pins below
change from active_low to active_high:
- gpio-leds: "lswxl:red:func" pin
- gpio-leds: "lswxl:red:hdderr{0,1}" pin
Fixes: e54e4b1b622e ("ARM: dts: add buffalo linkstation ls-wxl/wsxl")
Signed-off-by: Roger Shimizu <redacted>
---
arch/arm/boot/dts/kirkwood-lswxl.dts | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts
index 0e93f6d19259..f4700a60065b 100644
--- a/arch/arm/boot/dts/kirkwood-lswxl.dts
+++ b/arch/arm/boot/dts/kirkwood-lswxl.dts@@ -206,18 +206,17 @@ led at 5 { label = "lswxl:red:func"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led at 6 { label = "lswxl:red:hdderr0"; - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; }; led at 7 { label = "lswxl:red:hdderr1"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; };
--
2.1.4