[PATCH v3 3/7] ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl
flat view
STALE3925d
REVIEWED: 1 (1M)
From: Roger Shimizu <hidden>
Date: 2016-01-21 14:38:46
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v3 of 5 in this series; 1 review trailer.
Revisions (5)
The GPIOs controlling the LEDs, listed below, are active high, not low:
- gpio-leds: "lswxl:blue:power" pin
- gpio-leds: "lswxl:red:func" pin
- gpio-leds: "lswxl:red:hdderr{0,1}" pin
Fixes: e54e4b1b622e ("ARM: dts: add buffalo linkstation ls-wxl/wsxl")
Signed-off-by: Roger Shimizu <redacted>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/boot/dts/kirkwood-lswxl.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts
index 0e93f6d19259..b13ec20a7088 100644
--- a/arch/arm/boot/dts/kirkwood-lswxl.dts
+++ b/arch/arm/boot/dts/kirkwood-lswxl.dts@@ -201,23 +201,23 @@ led at 4 { label = "lswxl:blue:power"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; led at 5 { label = "lswxl:red:func"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led at 6 { label = "lswxl:red:hdderr0"; - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; }; led at 7 { label = "lswxl:red:hdderr1"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; };
--
2.1.4