[PATCH 11/14] ARM: dts: sun8i-a83t: Add R_PIO controller node to the dtsi
flat view
STALE3881d
SUPERSEDED
From: Vishnu Patekar <hidden>
Date: 2016-01-31 01:23:32
Also in:
linux-clk, linux-devicetree, linux-gpio, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v1 of 4 in this series.
Revisions (4)
- v1 current
- v2 [diff vs current]
- v3 [diff vs current]
- v4 [diff vs current]
Now that we have a driver for the R_PIO controller, add the corresponding device node to the dtsi. Signed-off-by: Vishnu Patekar <redacted> --- arch/arm/boot/dts/sun8i-a83t.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 5ea20ff..11be9e1 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi@@ -478,5 +478,26 @@ compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; + + r_pio: pinctrl at 01f02c00 { + compatible = "allwinner,sun8i-a83t-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 0>; + resets = <&apb0_reset 0>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + r_rsb_pins: r_rsb { + allwinner,pins = "PL0", "PL1"; + allwinner,function = "s_rsb"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + }; }; };
--
1.9.1